Tax ID: 581-864-433
FIBARO Walli Double Switch is a smart wall switch designed to control one or two light sources via Z-Wave network.
It measures active power and energy consumed by the controlled load.
You can install it with provided cover plate and switch button or other compatible.
The HE-TPS01-06 Advanced Programmable Touch Panel Switches bring ‘Impossibly Smart’ capabilities to your home lighting or motorized blinds, door locks, gates, and valves. They replace an existing in wall switch and bring over the Internet monitoring, control, and advanced programmability to up to five connected devices. The Touch Panel Switches are ‘Impossibly Thin’ on the wall yet packed with features to provide the ultimate in control and convenience.
FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Fibaro Double Cover Plate
Fibaro Single Cover Plate
Fibaro Triple Cover Plate
The HE-RS01 Relay Switch “Quinto” fits easily behind switches in standard electrical junction boxes or in a circuit breaker panel making connected devices ‘Impossibly Smart’. Thanks to Quinto’s five channel relays it can manage either: 1) up to five On/Off devices, 2) three On/Off devices and one bidirectional motor, or 3) one On/Off device and two bidirectional motors. Two independent relay channel inputs allow control of systems with different power sources or use of relay outputs as dry contacts.
For double gang outlets and switches, there’s Dual Nano Switch. Wire it into two switches or sockets for twice the control, twice the energy monitoring, and control of up to 5 amps / 1150 watts per switch channel.
With Qubino smart home solutions you can check if your lights are on or off and control them using your smartphone.
The HE- HLS01 High Load Switch with Thermostat Functions fits easily behind outlets making them ‘Impossibly Smart’ with over the Internet control and advanced programmability. In addition, built in Power Consumption System helps to monitor how much energy was used. With included NTC temperature sensor it provides thermostat functions where a local display and controls are not needed. The High Load Switch also adds safety to your home by protecting against overloads, overheat, overvoltage, spark and surge conditions.
The Qubino Flush 1D Relay Plus is a single channel Z-Wave switch with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve range and stability of your Z-wave network.
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly. Aeotec Nano Switch allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. Super small, only 1.58 inches wide and 0.76 inches deep, Nano Switch can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets requiring nothing in your home to be changed. This invisible method of installation works with the wiring that requires a neutral and allows for Nano Switch to be controlled both by Z-Wave and any existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, Fibaro, Jeedom, and Open Z-Wave. It’ll also work with Amazon Alexa when used with an Alexa compatible hub or gateway such as SmartThings.
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly. Aeotec Nano Switch with power metering allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. As well as its standard on / off control and automation, this edition offers accurate energy consumption monitoring, allowing you to track and reduce your electricity spend. Super small, only 1.58 inches wide and 0.76 inches deep, Nano Switch with power metering can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets, requiring nothing in your home to be changed. This invisible method of installation works with your wiring that has a neutral and for Nano Switch with power metering to be controlled both by Z-Wave and any existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, Fibaro, Jeedom, and Open Z-Wave. It’ll also work with Amazon Alexa when used with an Alexa compatible hub or gateway such as SmartThings.
FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO Dimmer 2 (FGD-212) and Walli Dimmer (FGWDEU-111). It should be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps.
FIBARO Walli Roller Shutter is a smart wall switch designed to control motors of roller blinds, awnings, venetian blinds and other single phase, AC powered devices via Z-Wave network.
No items found matching the search criteria
EGP – EGP
Hubs & Control
Lighting & Curtains
Switches & Outlets
Sensors
Heating & AC
Security & Safety
Entertainment
