Aeotec Nano Switch with Energy Metering, on/off controller with power metering, Z-Wave Plus, In-wall
- — 12 months warranty
- — 14 Days Return
- — Different payment methods
- — Prices are VAT Inclusive
Description
Specifications
Power input: 120 to 240VAC, 50/60Hz.
Repeater: Yes
Beaming: Yes
AES 128 Security: Yes
Power Input: 230V 50Hz, Max: 10A
Z-Wave Frequency: 868.42MHz
Max currents:
Resistive Max: 10A
Inductive Max: 5A
Capacitive Max: 3.5A
Max standby power: <0.8W.
Energy Measurement Input Voltage Required: 90 - 240VAC required to power and allow energy reading.
Power measurement accuracy: + or - 3W.
Dimensions: 42.5 x 40 x 20 mm
Varistor specifications:
DIP
07D471K
470VAC
30J ± 10%
9×12×3.8 mm
Accepted Input for L:
90 - 240VAC @ 50/60Hz
24VDC
IN/OUT terminal isolation from L/N: No.
External Switch Voltage Requirements:
S1 and S2 inputs the voltage inputted between L and N terminals.
L and N inputted with 90 - 240VAC, then the external switch must also be powered by 90 - 240VAC to S1 or S2 connection.
L and N inputted with 24VDC, then the external switch must also be powered by 24VDC to S1 or S2 connection.
Environment of Installation:
Must be installed indoors
Should be located in a dry location
Should be installed in a fire resistant plastic gangbox.
Should not be installed in a metal gangbox for optimization of Z-Wave range.
Operating temperature:
0℃ to 40℃
Relative humidity: 8% to 80%.
Operating distance:
Up to 150 metres outdoors.
Features
Downloads
Package Contents
Recommended Products
Reviews
No posts found