Aeotec

• Works with TRIAC dimmers and dimmer switches, including the Z-Wave Aeotec Nano Dimmer, to prevent low-energy lighting from flickering when dimmed.
• Tiny but powerful, it measures only 0.98x0.39x0.75 inches and fits behind a dimmer switch or inline near the light source.
• Compatible with most of the bulbs including LEDs, Dimmable LEDs, CFLs, Dimmable CFLs, and compact fluorescent lamps.
• Works with both 2-wire system and 3-wire systems (with and without a neutral) and works with most of the lamps that use less than 4 watts.
• Aeotec Bypass has been proved to enhance light dimming and control while reducing annoying flickering in an economical and effective way. 
• Package includes 1 pcs x Bypass, 1 pcs x installation manual.

Aeotec door/window sensor 6 is a battery-powered Z-Wave magnetic contact door/window sensor. The D/W sensor will send radio signals up to 5 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit (I.E. The door or window it is attached to is opened). The Aeon labs D/W sensor also has tamper prevention capabilities and low-battery alerts.

Aeotec door/window sensor Gen5 is a battery-powered Z-Wave magnetic contact door/window sensor. The D/W sensor will send radio signals up to 5 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit (I.E. The door or window it is attached to is opened). bidirectional mounting plates and a push button release clasp allows for easy end-user installation. The Aeon labs D/W sensor also has tamper prevention capabilities and low-battery alerts. The sensor is 20% smaller than the first, and also includes the latest stable Z-Wave technology including Z-Wave explorer frames.

The Aeotec Doorbell 6 also makes your entrance area smarter. By combining visual (1000lm) and audible (110dB) alarms, you'll be notified when someone is at your door. You can also connect the Aeotec Doorbell 6 to automated scenes and, for example, turn on the lights in the hallway when it is dark.

For double gang outlets and switches, there’s Dual Nano Switch. Wire it into two switches or sockets for twice the control, twice the energy monitoring, and control of up to 5 amps / 1150 watts per switch channel.
 

Aeon labs heavy duty smart switch is a control and monitor device for heavy duty appliance and utilities. It can fully control your high powered appliances and services wirelessly or with an automatic Schedule. You can save money immediately with both its scheduling and energy monitoring features. You'll receive real-time reports of just how much electricity you are paying for. You’ll then be able to using scheduling and automatic controls to reduce the money you spend on the appliances that need up to 40 amps of power.

MultiSensor 6 is only 4 cm in size. With Recessor it gets even smaller. Recessor allows Aeotec’s Z-Wave Plus Multisensor 6 to be installed within a ceiling or wall cavity. Once installed it’s only invisible, emerging only 1 cm from the wall or ceiling. Despite being recessed, MultiSensor 6 can still be powered either by batteries or by mains power.

MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. 

Aeotec smart dimmer switch dramatically improves the lighting in your home. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.

Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don’t. But perfect lighting has never been easy.

Use Z-Wave technology to control one of your home's motorized devices such as an awning, curtain, garage door, canopy, or skylight with the Aeotec Nano Shutter. Nano Shutter integrates with motors and converts them to Z-Wave. This mini controller can be wired directly to the motor or to any existing wall switch that controls the motor. It can also be connected to the Aeotec WallSwipe (sold separately), which will provide gesture and touch control. It features Z-Wave S2 Security - You'll experience a faster Z-Wave wireless performance speed by more than 50 percent, providing seamless automation and reduced latency down to milliseconds. S2 Security also offers a third layer of security with Elliptic Curve Diffie-Hellman (ECDH) secure key exchange, making common hacks such as man in the middle and brute force are virtually powerless. Plus you'll get an added layer of AES 128-bit encryption of wireless signals and pro-security grade UL 1023 compliance.