FIBARO

• Compatible with any certified Z-Wave or Z-Wave Plus controller
• Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
• Works as a Z-Wave signal repeater
• Allows for connecting: 6 DS18B20 sensors, 1 DHT sensor, 2 2-wire analog sensors, 2 3-wire analog sensor, 2 binary sensors
• Built-in temperature sensor

• Provides a reliable foundation for FIBARO System.
• Capable of controlling all FIBARO and other compatible devices using the following radio standards:
  • Z-Wave (500 series)
  • Wi-Fi – 2.4 GHz and 5 GHz (802.11 b/g/n/a/ac)
  • Nice FLOR, OPERA and PLN2+
• No Internet cable required, works also on Wi-Fi
• Modern interface designed for ease of use
• Enhanced and convenient scene editor
• Support for more advanced apps and drivers
• May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers

FIBARO Home Center 3 Lite is the lite version of most advanced smart home gateway on the market.

• Support Z-Wave Plus v2, Wi-Fi 2.4GHz
• Single-Core ARM Cortex A7 900 MHz, RAM 512 MB, FLASH Memory 4 GB eMMC
• Household profiles, advanced automation scenes, alarm panel, remote control and more
• Also support LUA scenes, max. 20 scenes
• It works independently or as a Slave in connection with HC3

FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO Dimmer 2 (FGD-212) and Walli Dimmer (FGWDEU-111). It should be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps.

Fibaro Double Cover Plate

Fibaro Triple Cover Plate

Fibaro Single Cover Plate

Walli N is a line of non-intelligent FIBARO sockets.

The Walli N USB Outlet provides two USB type A 5V, max. 2.4A total.

Walli N is a line of non-intelligent FIBARO sockets.

The Walli N TV-SAT Outlet provides two N-Type and one RF outlets.

Walli N is a line of non-intelligent FIBARO sockets.

The Walli N Ethernet Outlet provides two RJ45 outlets.

FIBARO Walli Roller Shutter is a smart wall switch designed to control motors of roller blinds, awnings, venetian blinds and other single phase, AC powered devices via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with provided cover plate and switch button or other compatible.

FIBARO Walli Dimmer is a smart wall dimmer designed to control light source via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with provided cover plate and switch button or other compatible.

Home Center 2 is the hub unit of high computing power, used to control the FIBARO system.

• Work of FIBARO control unit is protected by advanced data backup and recovery system.
• Using the user-friendly configuration interface of Home Center 2, you can create advanced, pre-defined scenes.
• HC2 can manage user rights and supports VoIP functionality and video intercoms.
• Home Center 2 gives users ability to write scripts in LUA, which extends the functionality of the system.

FIBARO Walli Double Switch is a smart wall switch designed to control one or two light sources via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with provided cover plate and switch button or other compatible.

FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network.
It measures active power and energy consumed by the controlled load.
You can install it with provided cover plate and socket cover or other compatible.

The device can be used with Fibaro The Heat Controller to provide the best temperature regulation.
It can be placed anywhere in the room and the device will use it as a reference point for the room temperature.
Before using, the sensor must be paired with the thermostatic head. One thermostatic head can be paired with only one sensor, but one sensor can be paired with up to three thermostatic heads.

The FIBARO Heat Controller is a remotely controlled thermostatic head to control temperature in your room.

It measures the temperature and automatically adjust the heat level. It can be mounted without tools on three types of thermostatic radiator valves.

You can create schedules via app to easily manage temperature throughout the week.

FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall.
Its high sensitivity allows detecting the presence of the carbon monoxide (CO) gas at the early stage to prevent carbon
monoxide poisoning. The alarm is signaled with a built-in siren, blinking LED indicator and by sending commands to Z-Wave network devices.
Additionally, the device is equipped with a temperature sensor.