FIBARO

FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices.

Roller Shutter 3 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.

Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.

FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The FIBARO Motion Sensor is battery powered device and designed to be installed quckly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The Motion Sensor can be used for lighting scenes and presence monitoring systems.

FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.

Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.

Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.

Built-in locking system will ensure that unauthorized person will not take control of your home.

FIBARO Home Center 3 Lite is the lite version of most advanced smart home gateway on the market.

• Support Z-Wave Plus v2, Wi-Fi 2.4GHz
• Single-Core ARM Cortex A7 900 MHz, RAM 512 MB, FLASH Memory 4 GB eMMC
• Household profiles, advanced automation scenes, alarm panel, remote control and more
• Also support LUA scenes, max. 20 scenes
• It works independently or as a Slave in connection with HC3

• Provides a reliable foundation for FIBARO System.
• Capable of controlling all FIBARO and other compatible devices using the following radio standards:
  • Z-Wave (500 series)
  • Wi-Fi – 2.4 GHz and 5 GHz (802.11 b/g/n/a/ac)
  • Nice FLOR, OPERA and PLN2+
• No Internet cable required, works also on Wi-Fi
• Modern interface designed for ease of use
• Enhanced and convenient scene editor
• Support for more advanced apps and drivers
• May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers

Home Center 2 is the hub unit of high computing power, used to control the FIBARO system.

• Work of FIBARO control unit is protected by advanced data backup and recovery system.
• Using the user-friendly configuration interface of Home Center 2, you can create advanced, pre-defined scenes.
• HC2 can manage user rights and supports VoIP functionality and video intercoms.
• Home Center 2 gives users ability to write scripts in LUA, which extends the functionality of the system.

FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.

The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.

In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.

FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.