FIBARO Walli Double Switch is a smart wall switch designed to control one or two light sources via Z-Wave network.
It measures active power and energy consumed by the controlled load.
You can install it with provided cover plate and switch button or other compatible.
The HE-TPS01-06 Advanced Programmable Touch Panel Switches bring ‘Impossibly Smart’ capabilities to your home lighting or motorized blinds, door locks, gates, and valves. They replace an existing in wall switch and bring over the Internet monitoring, control, and advanced programmability to up to five connected devices. The Touch Panel Switches are ‘Impossibly Thin’ on the wall yet packed with features to provide the ultimate in control and convenience.
FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Fibaro Single Cover Plate
Fibaro Double Cover Plate
Fibaro Triple Cover Plate
The HE-RS01 Relay Switch “Quinto” fits easily behind switches in standard electrical junction boxes or in a circuit breaker panel making connected devices ‘Impossibly Smart’. Thanks to Quinto’s five channel relays it can manage either: 1) up to five On/Off devices, 2) three On/Off devices and one bidirectional motor, or 3) one On/Off device and two bidirectional motors. Two independent relay channel inputs allow control of systems with different power sources or use of relay outputs as dry contacts.
For double gang outlets and switches, there’s Dual Nano Switch. Wire it into two switches or sockets for twice the control, twice the energy monitoring, and control of up to 5 amps / 1150 watts per switch channel.
With Qubino smart home solutions you can check if your lights are on or off and control them using your smartphone.
The HE- HLS01 High Load Switch with Thermostat Functions fits easily behind outlets making them ‘Impossibly Smart’ with over the Internet control and advanced programmability. In addition, built in Power Consumption System helps to monitor how much energy was used. With included NTC temperature sensor it provides thermostat functions where a local display and controls are not needed. The High Load Switch also adds safety to your home by protecting against overloads, overheat, overvoltage, spark and surge conditions.
The Qubino Flush 1D Relay Plus is a single channel Z-Wave switch with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve range and stability of your Z-wave network.
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly. Aeotec Nano Switch allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. Super small, only 1.58 inches wide and 0.76 inches deep, Nano Switch can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets requiring nothing in your home to be changed. This invisible method of installation works with the wiring that requires a neutral and allows for Nano Switch to be controlled both by Z-Wave and any existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, Fibaro, Jeedom, and Open Z-Wave. It’ll also work with Amazon Alexa when used with an Alexa compatible hub or gateway such as SmartThings.
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly. Aeotec Nano Switch with power metering allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. As well as its standard on / off control and automation, this edition offers accurate energy consumption monitoring, allowing you to track and reduce your electricity spend. Super small, only 1.58 inches wide and 0.76 inches deep, Nano Switch with power metering can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets, requiring nothing in your home to be changed. This invisible method of installation works with your wiring that has a neutral and for Nano Switch with power metering to be controlled both by Z-Wave and any existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, Fibaro, Jeedom, and Open Z-Wave. It’ll also work with Amazon Alexa when used with an Alexa compatible hub or gateway such as SmartThings.
MultiSensor 6 is only 4 cm in size. With Recessor it gets even smaller. Recessor allows Aeotec’s Z-Wave Plus Multisensor 6 to be installed within a ceiling or wall cavity. Once installed it’s only invisible, emerging only 1 cm from the wall or ceiling. Despite being recessed, MultiSensor 6 can still be powered either by batteries or by mains power.
FIBARO Walli Roller Shutter is a smart wall switch designed to control motors of roller blinds, awnings, venetian blinds and other single phase, AC powered devices via Z-Wave network.
FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO Dimmer 2 (FGD-212) and Walli Dimmer (FGWDEU-111). It should be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps.
FIBARO Walli Dimmer is a smart wall dimmer designed to control light source via Z-Wave network.
Walli N is a line of non-intelligent FIBARO sockets.
The Walli N USB Outlet provides two USB type A 5V, max. 2.4A total.
FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network. It measures active power and energy consumed by the controlled load. You can install it with provided cover plate and socket cover or other compatible.
Hubitat Elevation is a fast, reliable smart home platform that works with most devices. Hubitat Elevation is a versatile, customizable environment that allows you to build both simple and complex automations to satisfy even your most demanding clients. Includes the Hubitat Elevation® Model C-7 Hub with internal radios for both Zigbee and European frequency Z-Wave (868.4 MHz)
Monitor room temperature & humidity with the phone app and control your AC from anywhere, any time: Sensibo Sky comes with a complete range of smart features, like location-based control to enjoy geo-fencing and reach a desired room temperature, set weekly schedules & get the real time filter status to ensure a healthy environment in your house.
The Walli N TV-SAT Outlet provides two N-Type and one RF outlets.
With Qubino Flush Shutter close your shades when it gets too hot during the day. In winter, make sure they are open, so your home naturally gets warmer. Check and control your shades with a tap on your smartphone.
Smarten up your conventional lighting, control and dim your lights from anywhere. Qubino Mini Dimmer enables you to remotely control and dim all types of dimmable bulbs. Whether you’re unwinding on the couch, busy at work, or vacationing miles away, you’ll be able to remotely control and dim your home lighting from anywhere.
The Walli N Ethernet Outlet provides two RJ45 outlets.
Aeotec Recessed Door Sensor Gen5 is a battery powered, Z-Wave Plus based, magnetic door sensor with an extremely small form factor. Unlike other Z-Wave door / window sensors, Recessed Door Sensor Gen5 offers a unique, invisible installation – it’s easily installed within a doorframe meaning it avoids altering a room’s aesthetics without ever compromising on functionality. Recessed Door Sensor Gen5 can send Z-Wave signals to up to 5 associated devices within its own network, and does so simply when the door it’s installed within open or closes. Recessed Door Sensor Gen5 also has low-battery alerts and offers a simple method of replacing the battery. Compatible with certified Z-Wave gateways including Fibaro, HomeSeer, Indigo 7 for Mac, Samsung SmartThings, and Mios Vera.
The HE-HT01 is ‘Impossibly Smart’ and ‘Impossibly Thin’ Heating Thermostat, designed to maintain constant room and floor temperatures by providing sensors for both ambient and radiant floor heating systems. It controls electric heating systems like radiators, convection or electric fireplaces, plus boilers, and electric underfloor heating. Built in Power Consumption System precisely monitors how much energy you used during any particular day , week, or month.
The HE-FT01 Fan Coil Thermostat is elegantly designed and ‘Impossibly Smart’ providing wireless over the Internet control of your home’s fan coil heating/cooling system. It maintains constant room temperatures by using internal air temperature sensor and controls 2 pipe or 4 pipe air conditioning/heating systems such as: split/multi split systems, chillers and fan coil unit systems, central air conditioning systems, multi zone VRF/VRV, etc.
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features.
Smart Switch 6 is a smart z-wave plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.
And because it’s truly smart, Aeotec smart plug offers much more than just wireless control.
Control your electronical devices remotely and make your Smart Home even more smart.
With Qubino RGBW Dimmer you can choose between 16 million lighting shades or use lighting effects for different purposes. Using your smartphone, set your RGB/RGBW lights the color you want.
FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The FIBARO Motion Sensor is battery powered device and designed to be installed quckly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The Motion Sensor can be used for lighting scenes and presence monitoring systems.
3 different sensors are crafted into TriSensor’s impossibly small finish. A Motion Sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting.