FIBARO Walli Double Switch is a smart wall switch designed to control one or two light sources via Z-Wave network.
It measures active power and energy consumed by the controlled load.
You can install it with provided cover plate and switch button or other compatible.
The HE-TPS01-06 Advanced Programmable Touch Panel Switches bring ‘Impossibly Smart’ capabilities to your home lighting or motorized blinds, door locks, gates, and valves. They replace an existing in wall switch and bring over the Internet monitoring, control, and advanced programmability to up to five connected devices. The Touch Panel Switches are ‘Impossibly Thin’ on the wall yet packed with features to provide the ultimate in control and convenience.
FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Fibaro Single Cover Plate
Fibaro Double Cover Plate
Fibaro Triple Cover Plate
The HE-RS01 Relay Switch “Quinto” fits easily behind switches in standard electrical junction boxes or in a circuit breaker panel making connected devices ‘Impossibly Smart’. Thanks to Quinto’s five channel relays it can manage either: 1) up to five On/Off devices, 2) three On/Off devices and one bidirectional motor, or 3) one On/Off device and two bidirectional motors. Two independent relay channel inputs allow control of systems with different power sources or use of relay outputs as dry contacts.
For double gang outlets and switches, there’s Dual Nano Switch. Wire it into two switches or sockets for twice the control, twice the energy monitoring, and control of up to 5 amps / 1150 watts per switch channel.
With Qubino smart home solutions you can check if your lights are on or off and control them using your smartphone.
The HE- HLS01 High Load Switch with Thermostat Functions fits easily behind outlets making them ‘Impossibly Smart’ with over the Internet control and advanced programmability. In addition, built in Power Consumption System helps to monitor how much energy was used. With included NTC temperature sensor it provides thermostat functions where a local display and controls are not needed. The High Load Switch also adds safety to your home by protecting against overloads, overheat, overvoltage, spark and surge conditions.
The Qubino Flush 1D Relay Plus is a single channel Z-Wave switch with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve range and stability of your Z-wave network.
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly. Aeotec Nano Switch allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. Super small, only 1.58 inches wide and 0.76 inches deep, Nano Switch can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets requiring nothing in your home to be changed. This invisible method of installation works with the wiring that requires a neutral and allows for Nano Switch to be controlled both by Z-Wave and any existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, Fibaro, Jeedom, and Open Z-Wave. It’ll also work with Amazon Alexa when used with an Alexa compatible hub or gateway such as SmartThings.
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly. Aeotec Nano Switch with power metering allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. As well as its standard on / off control and automation, this edition offers accurate energy consumption monitoring, allowing you to track and reduce your electricity spend. Super small, only 1.58 inches wide and 0.76 inches deep, Nano Switch with power metering can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets, requiring nothing in your home to be changed. This invisible method of installation works with your wiring that has a neutral and for Nano Switch with power metering to be controlled both by Z-Wave and any existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, Fibaro, Jeedom, and Open Z-Wave. It’ll also work with Amazon Alexa when used with an Alexa compatible hub or gateway such as SmartThings.
MultiSensor 6 is only 4 cm in size. With Recessor it gets even smaller. Recessor allows Aeotec’s Z-Wave Plus Multisensor 6 to be installed within a ceiling or wall cavity. Once installed it’s only invisible, emerging only 1 cm from the wall or ceiling. Despite being recessed, MultiSensor 6 can still be powered either by batteries or by mains power.
FIBARO Walli Roller Shutter is a smart wall switch designed to control motors of roller blinds, awnings, venetian blinds and other single phase, AC powered devices via Z-Wave network.
FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO Dimmer 2 (FGD-212) and Walli Dimmer (FGWDEU-111). It should be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps.
FIBARO Walli Dimmer is a smart wall dimmer designed to control light source via Z-Wave network.
Walli N is a line of non-intelligent FIBARO sockets.
The Walli N USB Outlet provides two USB type A 5V, max. 2.4A total.
FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network. It measures active power and energy consumed by the controlled load. You can install it with provided cover plate and socket cover or other compatible.
Hubitat Elevation is a fast, reliable smart home platform that works with most devices. Hubitat Elevation is a versatile, customizable environment that allows you to build both simple and complex automations to satisfy even your most demanding clients. Includes the Hubitat Elevation® Model C-7 Hub with internal radios for both Zigbee and European frequency Z-Wave (868.4 MHz)
Monitor room temperature & humidity with the phone app and control your AC from anywhere, any time: Sensibo Sky comes with a complete range of smart features, like location-based control to enjoy geo-fencing and reach a desired room temperature, set weekly schedules & get the real time filter status to ensure a healthy environment in your house.
The Walli N TV-SAT Outlet provides two N-Type and one RF outlets.
With Qubino Flush Shutter close your shades when it gets too hot during the day. In winter, make sure they are open, so your home naturally gets warmer. Check and control your shades with a tap on your smartphone.
Smarten up your conventional lighting, control and dim your lights from anywhere. Qubino Mini Dimmer enables you to remotely control and dim all types of dimmable bulbs. Whether you’re unwinding on the couch, busy at work, or vacationing miles away, you’ll be able to remotely control and dim your home lighting from anywhere.
The Walli N Ethernet Outlet provides two RJ45 outlets.
Aeotec Recessed Door Sensor Gen5 is a battery powered, Z-Wave Plus based, magnetic door sensor with an extremely small form factor. Unlike other Z-Wave door / window sensors, Recessed Door Sensor Gen5 offers a unique, invisible installation – it’s easily installed within a doorframe meaning it avoids altering a room’s aesthetics without ever compromising on functionality. Recessed Door Sensor Gen5 can send Z-Wave signals to up to 5 associated devices within its own network, and does so simply when the door it’s installed within open or closes. Recessed Door Sensor Gen5 also has low-battery alerts and offers a simple method of replacing the battery. Compatible with certified Z-Wave gateways including Fibaro, HomeSeer, Indigo 7 for Mac, Samsung SmartThings, and Mios Vera.
The HE-HT01 is ‘Impossibly Smart’ and ‘Impossibly Thin’ Heating Thermostat, designed to maintain constant room and floor temperatures by providing sensors for both ambient and radiant floor heating systems. It controls electric heating systems like radiators, convection or electric fireplaces, plus boilers, and electric underfloor heating. Built in Power Consumption System precisely monitors how much energy you used during any particular day , week, or month.
The HE-FT01 Fan Coil Thermostat is elegantly designed and ‘Impossibly Smart’ providing wireless over the Internet control of your home’s fan coil heating/cooling system. It maintains constant room temperatures by using internal air temperature sensor and controls 2 pipe or 4 pipe air conditioning/heating systems such as: split/multi split systems, chillers and fan coil unit systems, central air conditioning systems, multi zone VRF/VRV, etc.
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features.
Smart Switch 6 is a smart z-wave plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.
And because it’s truly smart, Aeotec smart plug offers much more than just wireless control.
Control your electronical devices remotely and make your Smart Home even more smart.
With Qubino RGBW Dimmer you can choose between 16 million lighting shades or use lighting effects for different purposes. Using your smartphone, set your RGB/RGBW lights the color you want.
FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The FIBARO Motion Sensor is battery powered device and designed to be installed quckly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The Motion Sensor can be used for lighting scenes and presence monitoring systems.
3 different sensors are crafted into TriSensor’s impossibly small finish. A Motion Sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting.
FIBARO Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices.
Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.
FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices.
Roller Shutter 3 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Use Z-Wave technology to control one of your home's motorized devices such as an awning, curtain, garage door, canopy, or skylight with the Aeotec Nano Shutter. Nano Shutter integrates with motors and converts them to Z-Wave. This mini controller can be wired directly to the motor or to any existing wall switch that controls the motor. It can also be connected to the Aeotec WallSwipe (sold separately), which will provide gesture and touch control. It features Z-Wave S2 Security - You'll experience a faster Z-Wave wireless performance speed by more than 50 percent, providing seamless automation and reduced latency down to milliseconds. S2 Security also offers a third layer of security with Elliptic Curve Diffie-Hellman (ECDH) secure key exchange, making common hacks such as man in the middle and brute force are virtually powerless. Plus you'll get an added layer of AES 128-bit encryption of wireless signals and pro-security grade UL 1023 compliance.
Foscam FI9926P 1080P Pan&Tilt 2.4/5Ghz Dual Band WiFi IP Security Camera with 4X Optical Zoom, Home Surveillance Camera with Motion/Sound Detection,26ft Night Vision, Free Cloud Service Available
Echo Plus is a voice-controlled smart speaker with Alexa, perfect for any room. Just ask for music, news, information, and more. You can also call almost anyone and control compatible smart home devices with your voice.
Our most popular Echo is now even better. With a new speaker and design, Echo Dot is a voice-controlled smart speaker with Alexa that's perfect for any room. Just ask for music, news, information and more. You can also call almost anyone, and control compatible smart home devices with your voice.
Aeotec door/window sensor 6 is a battery-powered Z-Wave magnetic contact door/window sensor. The D/W sensor will send radio signals up to 5 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit (I.E. The door or window it is attached to is opened). The Aeon labs D/W sensor also has tamper prevention capabilities and low-battery alerts.
The Aeotec Doorbell 6 also makes your entrance area smarter. By combining visual (1000lm) and audible (110dB) alarms, you'll be notified when someone is at your door. You can also connect the Aeotec Doorbell 6 to automated scenes and, for example, turn on the lights in the hallway when it is dark.
The Yale Keyless Connected smart door lock gives you freedom to secure your home without the need for a key. Simple to use, you now have complete control on how you unlock your door. The Keyless Connected Smart Lock allows you complete control over how you lock your home, whether with a PIN code, key card, key tag, remote fob and even from your smartphone when connected to a smart home system (Z-Wave module need to be purchased separately). Plus, you can easily add and remove users, deciding who and when people have access to your home.
Includes Yale P-89-DMG-PB-60 Deadlocking Nightlatch, 60 mm Backset, Dark Metallic Finish.
Wifi Security Camera, Foscam X2 1080P Indoor Pan/Tilt Home Camera Wireless with Audio, Human Detection, Motion/Sound Detection, Night Vision, Cloud Storage, Compatible with Alexa
FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
Remotely controlled light dimming module FIBARO Dimmer 2 is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
Aeotec door/window sensor Gen5 is a battery-powered Z-Wave magnetic contact door/window sensor. The D/W sensor will send radio signals up to 5 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit (I.E. The door or window it is attached to is opened). bidirectional mounting plates and a push button release clasp allows for easy end-user installation. The Aeon labs D/W sensor also has tamper prevention capabilities and low-battery alerts. The sensor is 20% smaller than the first, and also includes the latest stable Z-Wave technology including Z-Wave explorer frames.
FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.
In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.
FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
Aeotec smart dimmer switch dramatically improves the lighting in your home. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.
Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don’t. But perfect lighting has never been easy.
2MP 1080p Outdoor WiFi PTZ Security Camera, 4x Optical Zoom, Dual band wireless
Foscam Full HD 2MP Home Security Camera, 2.4/5GHz Dual-Band WiFi Indoor Camera with AI Human Detection, Free Cloud Storage Service, Remote Monitor, Works with Alexa.
The Foscam FI9800P is a 720P HD Wireless IP Camera. Featuring Plug & Play for easy remote connectivity with no port forwarding required. Its ideal outdoor/indoor surveillance for a variety of uses.
Connect wirelessly with a wide range of smart devices and make them work together. Monitor and control connected devices in your home using a single SmartThings app for your Phone Automate connected devices in your home and set them to turn on or off when doors are opened, as people come and go, and much more.
We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.
Our most popular Echo is now even better. This version of Echo Dot also has an LED display that can show the time, outdoor temperature or timers. Play music, get the news, call almost anyone and control compatible smart home devices—just ask Alexa.
FIBARO Smoke Sensor is a universal, optical Z-Wave smoke detector. Fire alarm is signaled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands. The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which is programmable indicator of exceeding set temperature level. FIBARO Smoke Sensor is designed to be placed on a wall or ceiling. Visual indicator signals fire, operating mode and is used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).
Hubitat Elevation is a fast, reliable smart home platform that works with most devices. Hubitat Elevation is a versatile, customizable environment that allows you to build both simple and complex automations to satisfy even your most demanding clients.
8 Channel Network Video Recorder, IP Camera NVR for CCTV Security Surveillance Systems, PoE Connections, Motion Detection, Supports HDMI VGA Display and USB Storage, ONVIF
The Foscam D2EP is an integrated PoE dome IP Camera solution with IR-cut feature, for natural color reproduction. It combines a high quality digital video camera (Mpix) with network connectivity and a powerful web server, bringing clear video to your desktop from anywhere on your local network or via the Internet.
The HE-MMA01 is a mounting adapter for a din rail to directly connect HELTUN relay switches to the electrical panel.
Aeon labs heavy duty smart switch is a control and monitor device for heavy duty appliance and utilities. It can fully control your high powered appliances and services wirelessly or with an automatic Schedule. You can save money immediately with both its scheduling and energy monitoring features. You'll receive real-time reports of just how much electricity you are paying for. You’ll then be able to using scheduling and automatic controls to reduce the money you spend on the appliances that need up to 40 amps of power.
The G4P keeps more spots covered thanks to its extended viewing angle and the Super HD 4MP resolution ensures professional image quality. Featuring an easy access external SD card slot and weatherproof housing, it’s perfect for external wall mounting.
Convert Z-Wave commands to IR signal for up to 250 brand of split Air Conditioner with best class of worldwide AC model coverage
FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall. Its high sensitivity allows detecting the presence of the carbon monoxide (CO) gas at the early stage to prevent carbon monoxide poisoning. The alarm is signaled with a built-in siren, blinking LED indicator and by sending commands to Z-Wave network devices. Additionally, the device is equipped with a temperature sensor.
2-Apartment Multi Door Color Camera Intercom Silver Color
Home Center 2 is the hub unit of high computing power, used to control the FIBARO system.
FIBARO Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
FIBARO Wall Plug may be operated using the service button located on its casing or via any Z-Wave compatible controller.
Z-Wave module 2 - connects your Yale Smart Door Lock to leading Z-Wave home automation systems.
Compatible with Keyless and Conexis L1 Smart Door Locks, the quick and convenient tags give you access to your home with one simple tap.
Heatit Z-TRM3 is an electronic thermostat for electrical floor heating, designed to be mounted in a standard flush box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems. Heatit Z-TRM3 is equipped with a single-pole switch and fits into System 55 frames. The thermostat can withstand a load of max 16A /3600W at 230V. The thermostat may be used for water based heating if the thermostat is linked to the Heatit Z-Water.
The FIBARO Heat Controller is a remotely controlled thermostatic head to control temperature in your room.
It measures the temperature and automatically adjust the heat level. It can be mounted without tools on three types of thermostatic radiator valves.
You can create schedules via app to easily manage temperature throughout the week.
The Aeotec Radiator Thermostat (TRV) is designed to control radiators valves using the S2 framework and Z-Wave Plus. It is powered by Aeotec’s S2 technology.
Heating in harmony. Colder months mean a desire for warmer rooms without higher bills. Radiator Thermostat has been engineered in Germany to help keep every room of your home at the perfect temperature. It’s also been engineered to use automation intelligence to warm rooms without blistering costs. Even through the longest Winter.
Featuring more processing power than VeraEdge, and enabling control of additional device types, VeraPlus can help you expand your smart home system while maintaining the simplicity you’ve become accustomed to.