Tax ID: 581-864-433
MultiSensor 6 is only 4 cm in size. With Recessor it gets even smaller. Recessor allows Aeotec’s Z-Wave Plus Multisensor 6 to be installed within a ceiling or wall cavity. Once installed it’s only invisible, emerging only 1 cm from the wall or ceiling. Despite being recessed, MultiSensor 6 can still be powered either by batteries or by mains power.
Aeotec Recessed Door Sensor Gen5 is a battery powered, Z-Wave Plus based, magnetic door sensor with an extremely small form factor. Unlike other Z-Wave door / window sensors, Recessed Door Sensor Gen5 offers a unique, invisible installation – it’s easily installed within a doorframe meaning it avoids altering a room’s aesthetics without ever compromising on functionality. Recessed Door Sensor Gen5 can send Z-Wave signals to up to 5 associated devices within its own network, and does so simply when the door it’s installed within open or closes. Recessed Door Sensor Gen5 also has low-battery alerts and offers a simple method of replacing the battery. Compatible with certified Z-Wave gateways including Fibaro, HomeSeer, Indigo 7 for Mac, Samsung SmartThings, and Mios Vera.
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features.
FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The FIBARO Motion Sensor is battery powered device and designed to be installed quckly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The Motion Sensor can be used for lighting scenes and presence monitoring systems.
3 different sensors are crafted into TriSensor’s impossibly small finish. A Motion Sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting.
Color:
FIBARO Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices.
Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.
Aeotec door/window sensor 6 is a battery-powered Z-Wave magnetic contact door/window sensor. The D/W sensor will send radio signals up to 5 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit (I.E. The door or window it is attached to is opened). The Aeon labs D/W sensor also has tamper prevention capabilities and low-battery alerts.
Aeotec door/window sensor Gen5 is a battery-powered Z-Wave magnetic contact door/window sensor. The D/W sensor will send radio signals up to 5 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit (I.E. The door or window it is attached to is opened). bidirectional mounting plates and a push button release clasp allows for easy end-user installation. The Aeon labs D/W sensor also has tamper prevention capabilities and low-battery alerts. The sensor is 20% smaller than the first, and also includes the latest stable Z-Wave technology including Z-Wave explorer frames.
FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.
In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.
FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.
FIBARO Smoke Sensor is a universal, optical Z-Wave smoke detector. Fire alarm is signaled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands. The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which is programmable indicator of exceeding set temperature level. FIBARO Smoke Sensor is designed to be placed on a wall or ceiling. Visual indicator signals fire, operating mode and is used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).
FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall. Its high sensitivity allows detecting the presence of the carbon monoxide (CO) gas at the early stage to prevent carbon monoxide poisoning. The alarm is signaled with a built-in siren, blinking LED indicator and by sending commands to Z-Wave network devices. Additionally, the device is equipped with a temperature sensor.
No items found matching the search criteria
EGP – EGP
Hubs & Control
Lighting & Curtains
Switches & Outlets
Sensors
Heating & AC
Security & Safety
Entertainment
