Aeotec Nano Switch with Energy Metering, on/off controller with power metering, Z-Wave Plus, In-wall

Power input: 120 to 240VAC, 50/60Hz.

Repeater: Yes

Beaming: Yes

AES 128 Security: Yes

Power Input: 230V 50Hz, Max: 10A

Z-Wave Frequency: 868.42MHz

Max currents:

Resistive Max: 10A

Inductive Max: 5A 

Capacitive Max: 3.5A

Max standby power: <0.8W. 

Energy Measurement Input Voltage Required: 90 - 240VAC required to power and allow energy reading.

Power measurement accuracy: + or - 3W.

Dimensions: 42.5 x 40 x 20 mm

Varistor specifications: 

DIP

07D471K

470VAC

30J ± 10%

9×12×3.8 mm

Accepted Input for L:

90 - 240VAC @ 50/60Hz

24VDC

IN/OUT terminal isolation from L/N: No.

External Switch Voltage Requirements:

S1 and S2 inputs the voltage inputted between L and N terminals.

L and N inputted with 90 - 240VAC, then the external switch must also be powered by 90 - 240VAC to S1 or S2 connection.

L and N inputted with 24VDC, then the external switch must also be powered by 24VDC to S1 or S2 connection.

Environment of Installation:

Must be installed indoors

Should be located in a dry location

Should be installed in a fire resistant plastic gangbox.

Should not be installed in a metal gangbox for optimization of Z-Wave range.

Operating temperature: 

0℃ to 40℃

Relative humidity: 8% to 80%.

Operating distance: 

Up to 150 metres outdoors.